• DeutschDeutsch
  • EnglishEnglish
  • Patch cable configuration

    Patch cable configuration

    Welcome to our fiber laboratory!

    Our patch cord configuration tool allows you to design a patch cable using Corning® fibers from our portfolio. Options include pigtails with termination at one end face and patch cords with connectors at both ends of the fiber-optic cable.

    Do you need help in choosing the right termination? We will be at your disposal with our support and advice at any time!

    Configurable patch cable without protective sleeve

    Configurable patch cable without protective sleeve

    • FC/APC, FC/PC (narrow key or wide key)
    • LC/APC
    • SC/PC, SC/APC
    • Ceramic ferrule with flange (Ø 2.5 mm, PC polished)
    • Ceramic ferrule with flange (Ø 2.5 mm, APC polished)
    • Ceramic ferrule (Ø 2.5 mm, PC polished)

    Configurable patch cable with protective Hytrel sleeve and a diameter of 0.9 mm

    Configurable patch cable with protective sleeve (Ø 0.9 mm)

    • FC/APC, FC/PC (narrow key or wide key)
    • LC/APC
    • SC/PC, SC/APC
    • Ceramic ferrule with flange (Ø 2.5 mm, PC polished)
    • Ceramic ferrule with flange (Ø 2.5 mm, APC polished)
    • Ceramic ferrule (Ø 2.5 mm, PC polished)

    Configurable patch cable with Kevlar-reinforced protective sleeve and a diameter of 2 mm

    Configurable patch cable with Kevlar-reinforced protective sleeve (Ø 2 mm)

    • FC/PC (narrow key)
    • FC/APC (narrow key)

    Configurable patch cable with Kevlar-reinforced protective sleeve and a diameter of 3 mm

    Configurable patch cable with Kevlar-reinforced protective sleeve (Ø 3 mm)

    • SC/APC
    • SC/PC
    • FC/APC (narrow key or wide key)
    • FC/PC (narrow key or wide key)

    Patch cord configuration

    Connector assortment

    Connector assortment

    Your configured patch cord

    Corning’s® Fiber type

    Protective sleeve

    Input connector, including assembly

    Output connector, including assembly

    Length (Meter)

    Min: 0.2 m, Max: 10 m, Step: 0.1 m

    Quantity

    Piece

    Please note: The specified length can vary subject to manufacturing tolerances of up to ± 5 mm or 1% of the length (whichever the higher). Please contact us if you need tighter tolerances.

    Price of the selected configuration:

    0.00

    Plus 19% VAT, plus shipping costs

    Quote Request

    Your Data















    *Mandatory field

    Data protection

    Require a customized fiber-optic solution?
    We’d be happy to advise you!